Flat products
Our range of products
Test certificates
Acceptance inspection and test certificates in accordance with EN 10204
Cold-rolled sheet
EN 10130
DC01, DC03, DC04
Finish A
Hot-rolled sheet
EN 10111
DD11, DD12, DD13 pickled, greased, ungreased
EN 10025 Part 2 (2005)
S235JR
Hot-dip galvanized sheet for cold forming
EN 10327
DX51D+Z, DX52D+Z, DX53D+Z,
Finishes NA, MA, MB/C
Electrogalvanized sheet
EN 10152
DC01+ZE, DC03+ZE
Hot-dip aluminized sheet
EN 10327, DX51D+AS
coating 120 g/m2, other coatings on request,
greased and ungreased
Coil-coated colored sheet
Base material and various color coatings on request.
Dimensions
Thickness: 0.50 – 2.99 mm
Width: 1,000 – 1,500 mm
Length: 2,000 – 3,000 mm
Ask for our special laser brochure.
Structural steels
EN 10025 Part 2 (2005)
S235JR, S355J2+N
Tear plates S235JR
Pressure vessel steels
EN 10028 Part 2
P265GH, 16Mo3, 13CrMo4-5, 10CrMo9-10
EN 10028 Part 3, P355NH/NL1/NL2, P460NH/NL1/NL2
Unalloyed steels in accordance with ASME/ASTM
SA 516 Grade 70
Alloyed heat-resistant steels ASME/ASTM
SA 387 Grade 12 CL.2
SA 387 Grade 22 CL.2
Fine grain structural steels
EN 10025 Part 3
S275N, S275NL, S355N, S355NL, S420N, S420NL, S460N, S460NL
Heat treatable steels
EN 10083 Part 1
C35, C45, C60
EN 10083 Part 2, 42CrMo4
Case hardening steels
EN 10084
16MnCr5, 20MnCr5
Boron steel
ThyssenKrupp Schulte material sheet
TBL 2A
Hot-rolled fine grain steels for cold forming,
EN 10149 or material sheet
S260NC (e.g. TQ260), S355NC (e.g. TQ355), S355MC (e.g. PAS 355), S460MC (e.g. PAS 460), S550MC (e.g. PAS 550), S700MC (e.g. PAS 700)
TS-ThermoCut 1+2
High-strength, quenched and tempered fine grain structural steels
EN 10025 Part 6/ThyssenKrupp Steel Europe AG material sheet;
S690QL/N-A-XTRA M700, S690QL1/N-A-XTRA 700,
S890QL/XABO 890, S960QL/XABO 960, S1100QL/XABO 1100
Wear-resistant steels
300 HB/XAR 300, 400 HB/XAR 400, 450 HB/XAR 450, 500 HB/XAR 500
X120Mn12 (material no. 1.3401)
Dimensions*
Thickness: 1.50 – 200.00 mm
Width: to 3,000 mm
Length: to 12,000 mm
Surface finishes
untreated; pickled and greased; pickled and ungreased; blasted and primed; blasted and unprimed
Tolerances in accordance with EN 10029/10051
