with inspection certificate in accordance with
EN 10204 / 3.1 (3.1. B)

Flat products

Sheet – cold-rolled
EN 10088 Part 2, thickness 0.3 – 8.0 mm
Finish 2 R (III d): bright annealed
Finish 2 B (III c): heat-treated, pickled, cold re-rolled
Material no. 1.4016, 1.4301, 1.4307, 1.4404, 1.4509,
1.4512, 1.4539, 1.4541, 1.4571

 

 

Sheet – hot-rolled
EN 10088 Part 2 and AD2000 data sheet W2,
Thickness 2 – 100 mm
Finish 1 D (II a): heat-treated, pickled
Material no. 1.4301, 1.4307, 1.4404, 1.4462,
1.4539, 1.4541, 1.4571

Tear plate – hot-rolled, pickled
Material no. 1.4301

Perforated plate – cold-rolled
Round or square holes, material no. 1.4301

 

Strip – made from hot- and cold-rolled starting material
EN 10088 Part 2
Wide strip, slit strip, blanks, non-standard sheet sizes
Material no. 1.4016, 1.4301, 1.4307, 1.4404, 1.4512,
1.4541, 1.4571, special materials also available

Surface finishes

film-coated one or both sides, various films depending on intended use

ground grit 80 to grit 400, one or both sides, with protective film

brushed one or both sides, with protective film

Duplo ground and rebrushed

Decor pattern-rolled, marbled, embossed

 

Profiles

Round bars – hot-rolled or forged, pickled or peeled
EN 10088 Part 3
Material no. 1.4021, 1.4034, 1.4057, 1.4122, 1.4301, 1.4305,
1.4404, 1.4462, 1.4541, 1.4571

Flat bars – hot-rolled or cut from strip or sheet,
pickled
EN 10088 Part 3
Material no. 1.4301, 1.4404, 1.4541, 1.4571

Square bars – hot-rolled, pickled
EN 10088 Part 3
Material no. 1.4301, 1.4404, 1.4541, 1.4571

Angles – hot-rolled, pickled
EN 10088 Part 3
Unequal angles, material no. 1.4301, 1.4571
Equal angles, material no. 1.4301, 1.4404,
1.4541, 1.4571

Tee bars – hot-formed, pickled
EN 10088 Part 3
Material no. 1.4301, 1.4571

U-channels – hot-formed, pickled, hot-rolled
EN 10088 Part 3
Material no. 1.4301, 1.4571

Drawing profiles – extruded or laser-welded,
heat-treated, pickled
Material no. on request

I-beams (IPE/IPB) – hot-formed,
heat-treated, pickled
Material no. 1.4301, 1.4571

Bright round bars – drawn, ground, polished
EN 10088 Part 3/EN 10278
Material no. 1.4021, 1.4057, 1.4104, 1.4301, 1.4305, 1.4404, 1.4541, 1.4571

Bright square bars – drawn
EN 10088 Part 3/EN 10278
Material no. 1.4301, 1.4305, 1.4571

Bright hexagon bars – calibrated, drawn
EN 10088 Part 3/EN 10278
Material no. 1.4104, 1.4301, 1.4305, 1.4404, 1.4541, 1.4571

Square-edged angles – cold-rolled
EN 10088 Part 3, similar to DIN 59370
Material no. 1.4301

Bright flat bars– drawn
EN 10088 Part 3/EN 10278
Material no. 1.4301, 1.4571

Tubes/Pipes

Seamless tubes – cold or hot finished
Test scope in accordance with EN 10216 Part 5 TC1/TC2
(DIN 17458, test category 1 and 2 with AD2000-W2/-W10)
Material no. 1.4301, 1.4306, 1.4401, 1.4404, 1.4462, 1.4501,
1.4539, 1.4541, 1.4550, 1.4571, 1.4845, 1.4948

 

Valves and fittings

 

 

ASTM A 312, ASME SA 312, ASME Sec.II part A
Grade TP 304/304L, TP 316/316L, TP 321/321 H,
TP 316Ti, TP 347/347H, TP 304H, N08904 (TP 904L)

ASTM 790, ASME SA 790
Grade UNS S31803, UNS S32760

Hollow bars – hot finished (extruded)
Material no. 1.4301, 1.4306, 1.4404, 1.4571

Welded tubes – annealed or non-annealed
Test scope in accordance with EN 10217 Part 7
Material no. 1.4301, 1.4404, 1.4462, 1.4541, 1.4571

Welded tubes ANSI B 16.5
ASTM A312/530
Grade TP 304/304L, TP 316/316L

Structural and ornamental tubes – non-annealed, welded

Square tubes – welded
Material no. 1.4301, 1.4571

Welded fittings
(bends, T-pieces, reducers, caps)
Material no. 1.4301, 1.4541, 1.4571

Threaded fittings
Material no. 1.4301, 1.4401, 1.4436, 1.4571

Tube couplings
Material no. 1.4301, 1.4435

Flanges
Material no. 1.4301, 1.4306, 1.4404, 1.4541, 1.4571

Heat-resistant steels

Sheet, strip and blanks – cold- or hot-rolled
EN 10095/SEW 470-76
Finish 1C (I c): hot-rolled, not descaled
Finish 2C (III s): cold-rolled, not descaled
Material no. 1.4713, 1.4724, 1.4742, 1.4762, 1.4828, 1.4841, 1.4878

Round bars – bright, rolled or forged, annealed
Material no. 1.4828, 1.4841

Seamless or welded tubes – heat-treated, not descaled
SEW 470-76
Material no. 1.4749, 1.4828, 1.4841

Please ask for our full brochure.

www.edelstahl-service-center.de 

You can also find out more at:

Top	Printer version